BeastX MicroBeast Plus Pro V4 BMX76400PE


BeastX MicroBeast Plus Pro V4 (BMX76400PE)

More details

249,90 €

Add to wishlist

More info

BeastX MicroBeast Plus Pro V4

BeastX MicroBeast Plus Pro V4 is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircraft′s rotational movement with unprecedented precision and transmit the data digitally and in real time to the system. The housing made of plastic composite material keeps the weight of BeastX MicroBeast Plus Pro V4 sensationally low.

The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field. Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

The device comes with Firmware 4.1.5 ProEdition: Additional to the basic functionality as flybarless and tail gyro system an internal RPM Governor function for helicopters with electric or combustion drive is included as well as the AttidudeControl function which can level the helicopter automatically. This allows to activate different training aids like bail out rescue mode, 3D-Mode or flight trainer mode.

Technical data:

  • Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
  • Processor: 32 Bit ARM
  • Sensor: 6-Axis MEMS (Gyro + Accelerometer)
  • Dimensions: 36 x 25 x 14 mm
  • Weight (w/o wiring): ca. 11g
  • Requires a radio system with at least 6 output channels (5 control functions + throttle).
Servo outputs:
  • 3 swash plate servos Maximum adjustable servo update rate: 200Hz Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140° as well es freely configurable mixer with StudioX, i.e. for swash phasing
  • 1 rudder servo Supports mostly all types of servos with 1520µs, 960µs or 760µs Maximum adjustable servo update rate: 560Hz
  • When using a SingleLine receiver additionally: throttle output, auxiliary output for landing gear, position lights or else

Signal inputs:
  • Standard receiver with single servo output channels
  • SingleLine receivers: Spektrum DSM2/DSMX remote satellite*, JR RJ01 DMSS remote satellite*, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM
  • Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).
* only with Spektrum remote satellite adapter

Box contents:
  • Receiver connection cables
  • 3M adhesive pads
  • Adjustment tool
  • Quick start manual poster
  • Plastic quick reference card
  • Sticker set
Optional accessories:
  • USB2SYS Interface for communication with StudioX PC Software
  • Spektrum remote satellite adapter